series
Blood Pressure Unit
(Pat.P.)
_edited_edited_edited.jpg)
Non-contact pressure measurement
It measures the flow path pressure during perfusion, aseptically.
By feeding back to the pump, constant pressure liquid feeding is also possible.
* The illustration is an image of one line.
![IMG_4122[1]_edited.jpg](https://static.wixstatic.com/media/a26fa5_1fea64e766c74f42a5483ab7adb06bab~mv2.jpg/v1/crop/x_0,y_899,w_2250,h_1203/fill/w_808,h_432,al_c,q_80,usm_0.66_1.00_0.01,enc_auto/IMG_4122%5B1%5D_edited.jpg)
The pump unit can be installed in a CO2 incubator
Adopts a moisture-proof design and shield technology.
It is possible to install a perfusion system, including a pump, in a CO2 incubator.
It will control the two channels independently.
Touch panel controller
You can intuitively switch between constant pressure/pulsation and constant pressure/constant flow rate perfusion modes.
The data logging function is available, as standard.
Features
System configuration
Controller
It controls the pump and sets the parameter.
A touch panel is used to operate the pump, at constant pulsating pressure and flow rates.
Pump
The pumps are housed in a container with a moisture-proof design and shielding technology.
It controls each of the two channel lines and the two pumps independently.
There is a pump that can be used for general purposes, such as drainage in the container.
Buffer bottle
Using a unique mechanism that measures the flow path pressure via a buffer bottle, aseptic and a reusable sensing of channel pressure is possible.
