series
Perfusion with “cell desk”
Non-contact pressure measurement
It measures the flow path pressure during perfusion, aseptically.
By feeding back to the pump, constant pressure liquid feeding is also possible.
* The illustration is an image of one line.
The pump unit can be installed in a CO2 incubator
Adopts a moisture-proof design and shield technology.
It is possible to install a perfusion system, including a pump, in a CO2 incubator.
It will control the two channels independently.
Features
System configuration
Controller
It controls the pump and sets the parameter.
A touch panel is used to operate the pump, at constant pulsating pressure and flow rates.
![IMG_4061[2].JPG](https://static.wixstatic.com/media/a26fa5_6f1f87ff2fc447a3a8c15cb9ac9052e1~mv2.jpg/v1/fill/w_263,h_350,al_c,q_80,usm_0.66_1.00_0.01,enc_auto/a26fa5_6f1f87ff2fc447a3a8c15cb9ac9052e1~mv2.jpg)
Pump
The pumps are housed in a container with a moisture-proof design and shielding technology.
It controls each of the two channel lines and the two pumps independently.
There is a pump that can be used for general purposes, such as drainage in the container.
Buffer bottle
Using a unique mechanism that measures the flow path pressure via a buffer bottle, aseptic and a reusable sensing of channel pressure is possible.
